Differences

This shows you the differences between two versions of the page.

--- archive:bioinformatic_tools:abyss [2010/05/10 22:21]
jstjohn
+++ archive:bioinformatic_tools:abyss [2010/05/11 04:51]
jstjohn
@@ Line 13: / Line 13: @@
 Note that ABySS is also the recommended assembler by Illumina for large genomes. {{:bioinformatic_tools:abyss_technote_illumina.pdf|Illumina Technote Paper}}
 ==== Installing ====
@@ Line 60: / Line 59: @@
 make install
 </code>
+=== Alternate Install ===
+Attempt installing against campusdata's openmpi which is already configured to work with SGE. Note to force inclusion of the correct mpi.h file I specify the include path to the
+<code>
+cd /campusdata/BME235/programs/abyss_tmp/abyss-1.1.2
+./configure --prefix=/campusdata/BME235/programs/abyss_tmp/ CPPFLAGS='-I/opt/openmpi/include -I/campusdata/BME235/include'  --with-mpi=/opt/openmpi
+</code>
+Next i qlogin into some node and run make install in parallel:
+<code>
+qlogin
+make -j8 install
+</code>
+the installation crashed due to a warning (-Werror was enabled). I modified configure.ac so that it is no longer enabled:
+<code>
+#AC_SUBST(AM_CXXFLAGS, '-Wall -Wextra -Werror')
+AC_SUBST(AM_CXXFLAGS, '-Wall -Wextra')
+</code>
+Next I run autoconf to work with the modified configure.ac file:
+<code>
+/campus/BME235/bin/autoconf/bin/autoreconf
+/campus/BME235/bin/autoconf/bin/autoconf
+</code>
+Finally I re-do the configure, and install:
+<code>
+./configure --prefix=/campusdata/BME235/programs/abyss_tmp/ CPPFLAGS='-I/opt/openmpi/include -I/campusdata/BME235/include'  --with-mpi=/opt/openmpi
+make -j8 install
+cd ../
+fixmode . &
+</code>
 ==== Websites ====
@@ Line 70: / Line 106: @@
 [[http://www.open-mpi.org/software/ompi|OpenMPI]] \\
 [[http://code.google.com/p/google-sparsehash/downloads/list|Google sparsehash]]
+===== Slug Assembly =====
+====Attempt1====
+In the directory:
+  /campus/BME235/assemblies/slug/ABySS-assembly1
+I ran the following command to start the assembly process on this file in parallel MPI mode. note that the binaries for abyss were installed with open-mpi 1.4, but I am using mpirun 1.3. When we re-install open-mpi 1.4 so that it has SGE support, I will re-run this with that if there are problems. Here is the command executed to start the process:
+  /campus/BME235/assemblies/slug/ABySS-assembly1
+And here are the contents of the script I use to run everything:
+  #!/bin/bash
+  #
+  #$ -cwd
+  #$ -j y
+  #$ -S /bin/bash
+  #$ -V
+  #$ -l mem_free=15g
+  #
+  /opt/openmpi/bin/mpirun -np $NSLOTS abyss-pe -j j=2 np=$NSLOTS n=8 k=25 name=slugAbyss lib='lane1 lane2 lane3 lane5 lane6 lane7 lane8' lane1='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_1_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_1_2_all_qseq.fastq' lane2='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_2_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_2_2_all_qseq.fastq' lane3='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_3_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_3_2_all_qseq.fastq' lane5='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_5_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_5_2_all_qseq.fastq' lane6='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_6_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_6_2_all_qseq.fastq' lane7='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_7_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_7_2_all_qseq.fastq' lane8='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_8_1_all_qseq.fastq  /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_8_2_all_qseq.fastq'
+Unfortunately this command crashes. The error states that the LD_LIBRARY_PATH might need to be set to point to shared MPI libraries. Also it would probably be best to use our version of "mpirun" once we get it compiled with sge support.
+====Attempt 2====
+I modified the script to use the other parallel version of ABySS I installed as described above, attempted in the same directory since the last attempt was entirely unsuccessfull:
+<code>
+/campus/BME235/assemblies/slug/ABySS-assembly1/run1_abyss_mpi.sh:
+#!/bin/bash
+#
+#$ -cwd
+#$ -j y
+#$ -S /bin/bash
+#$ -V
+#$ -l mem_free=15g
+#
+export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/openmpi/lib:/campus/BME235/lib
+#make the new MPI version of abyss prioritized
+export PATH=/campus/BME235/programs/abyss_tmp/bin:$PATH/opt/openmpi/bin/mpirun -np $NSLOTS abyss-pe -j j=2 np=$NSLOTS n=8 k=25 name=slugAbyss lib='lane1 lane2 lane3 lane5 lane6 lane7 lane8' lane1='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_1_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_1_2_all_qseq.fastq' lane2='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_2_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_2_2_all_qseq.fastq' lane3='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_3_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_3_2_all_qseq.fastq' lane5='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_5_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_5_2_all_qseq.fastq' lane6='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_6_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_6_2_all_qseq.fastq' lane7='/campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_7_1_all_qseq.fastq /campus/BME235/data/slug/Illumina/illumina_run_1/CeleraReads/s_7_2_all_qseq.fastq' lane8='/campus/BME235/data/slug/I
+llumina/illumina_run_1/CeleraReads/s_8_1_all_qseq.fastq  /campus/BME235/data/slug/Illumina/illumina_
+run_1/CeleraReads/s_8_2_all_qseq.fastq'
+</code>
+And I run the script using the following qsub command:
+<code>
+qsub -pe orte 40 run1_abyss_mpi.sh
+</code>
+FAIL ARRRG!!
+Out of curiosity I decided to follow the example for how to run qsub on an MPI job over sun grid engine as documented on the campusrocks page.
+To see the test and results look into the following directory on campusrocks:
+  /campus/BME235/test
+I followed the example exactly and I get the following error (which is exactly the same as the one I get when trying to run ABySS!)
+<code>
+error: error: ending connection before all data received
+error:
+error reading job context from "qlogin_starter"
+--------------------------------------------------------------------------
+A daemon (pid 9204) died unexpectedly with status 1 while attempting
+to launch so we are aborting.
+There may be more information reported by the environment (see above).
+This may be because the daemon was unable to find all the needed shared
+libraries on the remote node. You may set your LD_LIBRARY_PATH to have the
+location of the shared libraries on the remote nodes and this will
+automatically be forwarded to the remote nodes.
+--------------------------------------------------------------------------
+--------------------------------------------------------------------------
+mpirun noticed that the job aborted, but has no info as to the process
+that caused that situation.
+--------------------------------------------------------------------------
+--------------------------------------------------------------------------
+mpirun was unable to cleanly terminate the daemons on the nodes shown
+below. Additional manual cleanup may be required - please refer to
+the "orte-clean" tool for assistance.
+--------------------------------------------------------------------------
+        campusrocks-0-7.local - daemon did not report back when launched
+        campusrocks-0-14.local - daemon did not report back when launched
+</code>
+I am now submitting an IT request to have someone look into this.
 ===== References =====
 <refnotes>notes-separator: none</refnotes>
 ~~REFNOTES cite~~

Banana Slug Genomics

User Tools

Site Tools

Differences

Page Tools